The Ultimate Guide to Pilot Bearing Pullers from Harbor Freight

Pilot bearing pullers are essential tools for any mechanic who works on automotive transmissions. They are used to remove the pilot bearing from the crankshaft, which is a critical step in transmission repair or replacement. Harbor Freight offers a wide variety of pilot bearing pullers, so you can find the right one for your needs.

What is a Pilot Bearing Puller?

A pilot bearing puller is a tool that is used to remove the pilot bearing from the crankshaft. The pilot bearing is a small, ball bearing that is pressed into the end of the crankshaft. It supports the input shaft of the transmission and helps to keep it aligned.

Why Do I Need a Pilot Bearing Puller?

If you are replacing the transmission on your vehicle, you will need to remove the pilot bearing from the crankshaft. This is a critical step, as the pilot bearing must be properly seated in order for the transmission to function properly.

How Do I Use a Pilot Bearing Puller?

Using a pilot bearing puller is a relatively simple process. First, you will need to select the correct puller for your application. Harbor Freight offers a variety of pullers to choose from, so you can find the one that is right for your needs.

Once you have selected the correct puller, you will need to follow these steps:

Remove the transmission. This is a complex process, so it is important to consult your vehicle's service manual for specific instructions.

Locate the pilot bearing. The pilot bearing is typically located at the end of the crankshaft.

Attach the puller to the pilot bearing. The puller will have a set of jaws that will grip the pilot bearing.

Tighten the puller. This will cause the jaws to grip the pilot bearing and pull it out of the crankshaft.

Stories

Story 1

I was working on a transmission repair for a customer, and I needed to remove the pilot bearing. I didn't have a pilot bearing puller, so I tried to use a pair of pliers to remove it. This was a mistake, as the pliers damaged the pilot bearing and I had to replace it.

Story 2

I was working on a transmission replacement for a customer, and I used a pilot bearing puller to remove the pilot bearing. The puller worked perfectly, and I was able to remove the pilot bearing without any damage.

Story 3

I was working on a transmission repair for a customer, and I used a pilot bearing puller that was too small for the job. This caused the puller to slip off the pilot bearing, and I had to use a larger puller to remove the bearing.

Benefits

Benefit 1

Pilot bearing pullers are essential tools for any mechanic who works on automotive transmissions. They make it easy to remove the pilot bearing from the crankshaft, which is a critical step in transmission repair or replacement.

Benefit 2

Harbor Freight offers a wide variety of pilot bearing pullers, so you can find the right one for your needs. They have pullers for all makes and models of vehicles, and they are available in a variety of sizes and styles.

Benefit 3

Pilot bearing pullers are relatively inexpensive, so they are a great investment for any mechanic. They can save you time and money in the long run, and they can help you to avoid damaging your transmission.

How to

How to Choose the Right Pilot Bearing Puller

When choosing a pilot bearing puller, it is important to consider the following factors:

The make and model of your vehicle

The size of the pilot bearing

The style of the puller

Harbor Freight offers a variety of pilot bearing pullers, so you can find the right one for your needs. They have pullers for all makes and models of vehicles, and they are available in a variety of sizes and styles.

How to Use a Pilot Bearing Puller

Once you have selected the correct puller, you will need to follow these steps:

Remove the transmission. This is a complex process, so it is important to consult your vehicle's service manual for specific instructions.

Locate the pilot bearing. The pilot bearing is typically located at the end of the crankshaft.

Attach the puller to the pilot bearing. The puller will have a set of jaws that will grip the pilot bearing.

Tighten the puller. This will cause the jaws to grip the pilot bearing and pull it out of the crankshaft.

Tables

Feature	Harbor Freight Pilot Bearing Puller
Size	1-1/2"
Capacity	1/2" to 1-3/8"

The Ultimate Guide to Pilot Bearing Pullers from Harbor Freight